HHO Index » Assembly http://www.hhoindex.com HHO information and HHO supplies portal. Sun, 23 May 2010 05:35:26 +0000 en hourly 1 admin admin Just another WordPress weblog No No How to assemble the HHO generator part 3 http://www.hhoindex.com/how-to-assemble-the-hho-generator-part-3-3/232/ http://www.hhoindex.com/how-to-assemble-the-hho-generator-part-3-3/232/#comments Mon, 08 Feb 2010 17:37:09 +0000 admin http://www.hhoindex.com/how-to-assemble-the-hho-generator-part-3-3/232/

Here is the long awaited part 3 to my assembly of the HHO generator. I hope I have covered everything. If you need some more info, please let me know.

]]>

Here is the long awaited part 3 to my assembly of the HHO generator. I hope I have covered everything. If you need some more info, please let me know.

]]> http://www.hhoindex.com/how-to-assemble-the-hho-generator-part-3-3/232/feed/ 0 How to assemble the HHO generator part 2 http://www.hhoindex.com/how-to-assemble-the-hho-generator-part-2-3/214/ http://www.hhoindex.com/how-to-assemble-the-hho-generator-part-2-3/214/#comments Wed, 11 Nov 2009 17:45:50 +0000 admin http://www.hhoindex.com/how-to-assemble-the-hho-generator-part-2-3/214/

I have been asked to show the assembly of my cell, so here it is. Sorry if anything is unclear. I tried to show the basic steps without showing any machining, etc. The pipes are 304 SS, but 316 works well also. Part 3 will be uploaded after the cell is sealed and ready to run.

More on How to assemble the HHO generator part 2

]]>

I have been asked to show the assembly of my cell, so here it is. Sorry if anything is unclear. I tried to show the basic steps without showing any machining, etc. The pipes are 304 SS, but 316 works well also. Part 3 will be uploaded after the cell is sealed and ready to run.

]]> http://www.hhoindex.com/how-to-assemble-the-hho-generator-part-2-3/214/feed/ 0 How to assemble the HHO generator part 3 http://www.hhoindex.com/how-to-assemble-the-hho-generator-part-3-2/199/ http://www.hhoindex.com/how-to-assemble-the-hho-generator-part-3-2/199/#comments Thu, 27 Aug 2009 07:47:39 +0000 admin http://www.hhoindex.com/how-to-assemble-the-hho-generator-part-3-2/199/

Here is the long awaited part 3 to my assembly of the HHO generator. I hope I have covered everything. If you need some more info, please let me know.

]]>

Here is the long awaited part 3 to my assembly of the HHO generator. I hope I have covered everything. If you need some more info, please let me know.

]]> http://www.hhoindex.com/how-to-assemble-the-hho-generator-part-3-2/199/feed/ 0 How to assemble the HHO generator part 1 http://www.hhoindex.com/how-to-assemble-the-hho-generator-part-1-3/184/ http://www.hhoindex.com/how-to-assemble-the-hho-generator-part-1-3/184/#comments Tue, 16 Jun 2009 17:43:54 +0000 admin http://www.hhoindex.com/how-to-assemble-the-hho-generator-part-1-3/184/

I have been asked to show the assembly of my cell, so here it is. Sorry if anything is unclear. I tried to show the basic steps without showing any machining, etc. The pipes are 304 SS, but 316 works well also. Part 3 will be uploaded after the cell is sealed and ready to run. I insulate the pipes from the Positive lead/screw by first coating the screw with 2 coats of liquid electrical tape. When that is dry, I put electrical shrink wrap tubing on the screw, making sure to leave the end ...

More on How to assemble the HHO generator part 1

]]>

I have been asked to show the assembly of my cell, so here it is. Sorry if anything is unclear. I tried to show the basic steps without showing any machining, etc. The pipes are 304 SS, but 316 works well also. Part 3 will be uploaded after the cell is sealed and ready to run. I insulate the pipes from the Positive lead/screw by first coating the screw with 2 coats of liquid electrical tape. When that is dry, I put electrical shrink wrap tubing on the screw, making sure to leave the end ...

]]> http://www.hhoindex.com/how-to-assemble-the-hho-generator-part-1-3/184/feed/ 0 How to assemble the HHO generator part 3 http://www.hhoindex.com/how-to-assemble-the-hho-generator-part-3/174/ http://www.hhoindex.com/how-to-assemble-the-hho-generator-part-3/174/#comments Sat, 02 May 2009 05:31:10 +0000 admin http://www.hhoindex.com/how-to-assemble-the-hho-generator-part-3/174/

Here is the long awaited part 3 to my assembly of the HHO generator. I hope I have covered everything. If you need some more info, please let me know.

]]>

Here is the long awaited part 3 to my assembly of the HHO generator. I hope I have covered everything. If you need some more info, please let me know.

]]> http://www.hhoindex.com/how-to-assemble-the-hho-generator-part-3/174/feed/ 0 How to assemble the HHO generator part 2 http://www.hhoindex.com/how-to-assemble-the-hho-generator-part-2-2/165/ http://www.hhoindex.com/how-to-assemble-the-hho-generator-part-2-2/165/#comments Wed, 18 Mar 2009 05:30:05 +0000 admin http://www.hhoindex.com/how-to-assemble-the-hho-generator-part-2-2/165/

I have been asked to show the assembly of my cell, so here it is. Sorry if anything is unclear. I tried to show the basic steps without showing any machining, etc. The pipes are 304 SS, but 316 works well also. Part 3 will be uploaded after the cell is sealed and ready to run.

More on How to assemble the HHO generator part 2

]]>

I have been asked to show the assembly of my cell, so here it is. Sorry if anything is unclear. I tried to show the basic steps without showing any machining, etc. The pipes are 304 SS, but 316 works well also. Part 3 will be uploaded after the cell is sealed and ready to run.

]]> http://www.hhoindex.com/how-to-assemble-the-hho-generator-part-2-2/165/feed/ 0 How to assemble the HHO generator part 1 http://www.hhoindex.com/how-to-assemble-the-hho-generator-part-1-2/162/ http://www.hhoindex.com/how-to-assemble-the-hho-generator-part-1-2/162/#comments Tue, 03 Mar 2009 17:47:30 +0000 admin http://www.hhoindex.com/how-to-assemble-the-hho-generator-part-1-2/162/

I have been asked to show the assembly of my cell, so here it is. Sorry if anything is unclear. I tried to show the basic steps without showing any machining, etc. The pipes are 304 SS, but 316 works well also. Part 3 will be uploaded after the cell is sealed and ready to run.
I insulate the pipes from the Positive lead/screw by first coating the screw with 2 coats of liquid electrical tape. When that is dry, I put electrical shrink wrap tubing on the screw, making sure to leave the end thread exposed for connecting it to the center tube. The holes in the pipes that the positive lead screw passes through are twice the size of the screw, leaving plenty of room for the screw and insulation to fit through......if your holes are aligned.

More on How to assemble the HHO generator part 1

]]>

I have been asked to show the assembly of my cell, so here it is. Sorry if anything is unclear. I tried to show the basic steps without showing any machining, etc. The pipes are 304 SS, but 316 works well also. Part 3 will be uploaded after the cell is sealed and ready to run.
I insulate the pipes from the Positive lead/screw by first coating the screw with 2 coats of liquid electrical tape. When that is dry, I put electrical shrink wrap tubing on the screw, making sure to leave the end thread exposed for connecting it to the center tube. The holes in the pipes that the positive lead screw passes through are twice the size of the screw, leaving plenty of room for the screw and insulation to fit through......if your holes are aligned.

]]> http://www.hhoindex.com/how-to-assemble-the-hho-generator-part-1-2/162/feed/ 0 How to assemble the HHO generator part 2 http://www.hhoindex.com/how-to-assemble-the-hho-generator-part-2/151/ http://www.hhoindex.com/how-to-assemble-the-hho-generator-part-2/151/#comments Wed, 07 Jan 2009 17:58:06 +0000 admin http://www.hhoindex.com/how-to-assemble-the-hho-generator-part-2/151/

I have been asked to show the assembly of my cell, so here it is. Sorry if anything is unclear. I tried to show the basic steps without showing any machining, etc. The pipes are 304 SS, but 316 works well also. Part 3 will be uploaded after the cell is sealed and ready to run.

More on How to assemble the HHO generator part 2

]]>

I have been asked to show the assembly of my cell, so here it is. Sorry if anything is unclear. I tried to show the basic steps without showing any machining, etc. The pipes are 304 SS, but 316 works well also. Part 3 will be uploaded after the cell is sealed and ready to run.

]]> http://www.hhoindex.com/how-to-assemble-the-hho-generator-part-2/151/feed/ 0 How to assemble the HHO generator part 1 http://www.hhoindex.com/how-to-assemble-the-hho-generator-part-1/141/ http://www.hhoindex.com/how-to-assemble-the-hho-generator-part-1/141/#comments Tue, 18 Nov 2008 22:15:10 +0000 admin http://www.hhoindex.com/how-to-assemble-the-hho-generator-part-1/141/

I have been asked to show the assembly of my cell, so here it is. Sorry if anything is unclear. I tried to show the basic steps without showing any machining, etc. The pipes are 304 SS, but 316 works well also. Part 3 will be uploaded after the cell is sealed and ready to run.
I insulate the pipes from the Positive lead/screw by first coating the screw with 2 coats of liquid electrical tape. When that is dry, I put electrical shrink wrap tubing on the screw, making sure to leave the end thread exposed for connecting it to the center tube. The holes in the pipes that the positive lead screw passes through are twice the size of the screw, leaving plenty of room for the screw and insulation to fit through......if your holes are aligned.

More on How to assemble the HHO generator part 1

]]>

I have been asked to show the assembly of my cell, so here it is. Sorry if anything is unclear. I tried to show the basic steps without showing any machining, etc. The pipes are 304 SS, but 316 works well also. Part 3 will be uploaded after the cell is sealed and ready to run.
I insulate the pipes from the Positive lead/screw by first coating the screw with 2 coats of liquid electrical tape. When that is dry, I put electrical shrink wrap tubing on the screw, making sure to leave the end thread exposed for connecting it to the center tube. The holes in the pipes that the positive lead screw passes through are twice the size of the screw, leaving plenty of room for the screw and insulation to fit through......if your holes are aligned.

]]> http://www.hhoindex.com/how-to-assemble-the-hho-generator-part-1/141/feed/ 0